0
Hi I have a Hoover vision tech, it start of washing then quarter way through it stops and says E16. Is it possible if u tell me what's wrong with washing machine
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Hoover Vision Tech stops part way through wash with E16
- The problem
- A Hoover Vision Tech washing machine starts a programme but stops about a quarter of the way through and displays fault code E16.
- Likely cause
- The accepted reply suggests a fault in the water heating system: possibly the heater, the NTC sensor, or the heating circuit on the PCB. This is presented as a probable diagnosis because the machine stops during the wash stage when it would normally heat the water.
- What fixed it
- No confirmed repair was documented. The strongest supported diagnosis is a heating-circuit related fault. Further diagnosis should be carried out by a suitably qualified appliance engineer.
- Checks to try
- Machine stops about a quarter of the way through the wash cycle
- Fault code E16 is displayed
- Stops at the stage where the water would normally be heating
- Parts or tools mentioned
- Heater
- NTC
- PCB heating circuit
Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.
Cause identifiedGenerated 16 Aug 2026 · AI summaries can make mistakes - read the full thread below.
Was this summary helpful?
1 Answer
Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered almost 10 years ago
I don't have E16 but it could be related to the heater or NTC or heating circuit in the pcb if it's stopping on the wash cycle where it should be heating the water.
Whitegoods Help — appliance repair expert and forum host.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Hisense washing machine not working
1 reply
No water in the drum after EF3 fault
4 replies
Hisense washing machine 001 code
6 replies
LG F1222TD PCB
5 replies
Bosch series 6 washer / drier stuck on 0.00 time and will not respond to any button
1 reply
Miele WEG365 WCS: drain fault and pump cavitation after transport - looking for W1/PowerWash expertise
2 replies
Water leaking from drain filter
1 reply
Water leaking from drawer of Meile washing machine
1 reply
Bosch washing machine only spins sometimes
2 replies
Hoover Wsahing Machine NOT filling with ENOUGH water
3 replies