All horizontal lights flashing
Hello Guys
This machine is Hotpoint Aquarius WDL540P
All horizontal lights are flashing. In attempting to solve it I have checked the pump/filter for blockage, twice.
The machine switches ON and water goes into the soap box. But for the time it was running, it does not seem to be enough water when I disconnected the drain hose.
When switched ON I timed it, and it runs for One Minute, then Super Wash, Extra Rinse, Mini Load, Slow Spin lights all begin to flash. The Wash Basket symbol and the Door Lock lights remain steady. Any ideas, please.
Thanks for any help.
Satker
Read more: https://www.diynot.com/diy/threads/power-but-no-lights.480153/#ixzz4dN7QLggk
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Hotpoint Aquarius WDL540P flashing horizontal lights during fill
- The problem
- A Hotpoint Aquarius WDL540P would switch on and take in some water, then after about one minute the Super Wash, Extra Rinse, Mini Load and Slow Spin lights flashed together while the wash basket and door lock lights stayed on. The user also felt the fill level seemed too low and had already checked the pump/filter for blockage twice.
- Likely cause
- The accepted diagnosis was water siphoning away during fill because the drain hose may have been inserted too far down the standpipe or positioned too low, allowing water to run straight to drain.
- What fixed it
- Check whether water is flowing out through the drain hose while the machine is filling, and correct the drain hose position if it is too low or too far down the standpipe. The exact adjustment made was not described.
- Checks to try
- Pump/filter checked twice for blockage
- Observed machine filling, then fault after about one minute
- Considered whether water was draining away via the drain hose during fill
3 Answers
When it fills for a minute is any water going down the drain hose out into the drain?
Need Professional Help or Spare Parts?
Thank you for your response Andy. I have been checking and double checking the machine today. It is working as I send this.
Thank you.
Satker
The reason I asked is if it's been moved and the drain hose is too far down the stand pipe or too low water can siphon out and it runs straight out down the drain.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Samsung AddWash WW10T654DLH turn on but freeze (calibration interruption also)
0 answers • 1 reply
Disconnecting washing machine
0 answers • 2 replies
Power button not turning on washing machine
0 answers • 2 replies
Can this washer be repaired?
1 answer • 1 reply
Hotpoint F7 E2 Fault
1 answer • 1 reply
My Bosch washing machine is stuck on 33 minutes remaining
1 answer • 1 reply
Bosch washing machine door lock accidentally triggered with the door open – how I reset it
0 answers • 2 replies
Cant identify the correct replacement carbon brushea
0 answers • 2 replies
LG washing machine making intermittent noise — video link included
1 answer • 4 replies
Washing machine beeps then shuts down
1 answer • 1 reply
