Solved

Overloaded machine.

OVOverweight.
Asked over 8 years ago 6,523 views
0

Zanussi WDT 1085. Max. load 4.5Kg.

I have overloaded machine on a wash, rinse, spin programme and when started it almost immediately trips the RCD. The m/c is now dead with the door locked ;- what to do ?

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Zanussi WDT 1085 trips RCD after overload and remains locked

The problem
A Zanussi WDT 1085 washer-dryer, rated at 4.5kg max load, was overloaded on a wash/rinse/spin programme. It then tripped the RCD almost immediately after starting, became dead, and the door remained locked.
Likely cause
An electrical fault is indicated by the immediate RCD trip, but the discussion does not identify a specific failed component or confirm that overloading directly caused the fault.
What fixed it
The accepted advice was that the fault probably requires inspection by an engineer because there are too many possible causes to diagnose from the symptoms alone. No specific repair was confirmed in the discussion.
Checks to try
  • Machine overloaded beyond stated 4.5kg maximum load
  • RCD tripped almost immediately after programme start
  • Machine left dead with door locked

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Professional repair recommendedGenerated 19 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 8 years ago

It's a fault that probably needs an engineer to look at. There's too many variables and possibilities. These articles may help though -

Washing Machine Door Will Not Open

Washing Machine Tripping or Fusing Electrics

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.