Solved

Grinding sound when the machine is in spin

HIHillen1986
Asked over 8 years ago 2,552 views
0

ECOWMB81445LW Beko.

I'm maintenance Engineer but haven't worked on washing machines, thought i would get expert advice before taking the machine apart.

When the machine goes in to spin cycle, there is a dull grinding sort of sound, it progressively gets louder the faster the drum spins. I have assumed this to be bearings, but any spares websites i go on don't offer bearings, any other ideas what it could be? If not I'm going to take it apart and find the problem, but would be easier if pointed in the right direction.

Any ideas are greatly appreciated.

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Beko ECOWMB81445LW grinding noise during spin, likely drum bearing issue

The problem
Beko ECOWMB81445LW washing machine makes a dull grinding noise in the spin cycle which gets louder as drum speed increases.
Likely cause
The accepted reply says worn or faulty drum bearings are a likely explanation, although it also notes drum bearings more typically produce a rumbling noise rather than a grinding sound. No strip-down or confirming test was reported.
What fixed it
Accepted advice was not to get involved if the bearings are faulty, because on many modern machines the bearings are pre-fitted in a sealed tub and repair is a major and expensive job. Exact repair was not confirmed.
Checks to try
  • Noise occurs during spin
  • Noise progressively gets louder as drum speed increases

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 12 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 8 years ago

Hello there. If the bearings are worn or faulty I would not get involved. Most modern washing machines have the bearings pre-fitted inside a sealed tub, so repairing is a very big job and pretty expensive. However drum bearings tend to produce a rumble - What do noisy drum bearings sound like?

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.