Solved
Hisense

Hisense washing machine very noisy spin

TOTopcat
Asked almost 2 years ago 9,252 views
0

Hi

This washer seems ridiculously loud on spin (please see video)

It’s so loud you cannot hear anyone speaking near it!

Anyone any ideas if this is OK or what the fault is if not. I am sure it wasn’t this loud when we first bought it. (Out of guarantee)

Thanks

IMG_0524.mov

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Hisense washing machine very noisy on spin, likely drum pulley issue

The problem
A Hisense washing machine was reported to be extremely loud during spin, much louder than when first bought. The noise in the video was described by the accepted reply as similar to a rattling, tapping or grinding spin noise.
Likely cause
The accepted solution suggested the noise was similar to a known drum pulley-related problem. This is a probable diagnosis only; the exact fault was not confirmed in the discussion.
What fixed it
The recommended action was to investigate the drum pulley. No completed repair or confirmed fault was posted back, so the exact repair is not confirmed.
Checks to try
  • Video of the spin noise was provided
  • Accepted reply compared the sound to a rattling/tapping/grinding noise issue
  • Original poster said they would check the drum pulley

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 6 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

2 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered almost 2 years ago

Hello Topcat. It sounds very similar to the problem described in my article on whitegoodshelp, rattling tapping grinding noise on washing machine so I would investigate that first.

Whitegoods Help — appliance repair expert and forum host.
0
TO
Topcat
Answered almost 2 years ago

Hi Andy yes it does sound similar, will take a look at the drum pulley, will confirm when checked

Thanks a lot

Tony

Your Answer

Sign in to share your expertise and post an answer.