Solved

Bosh Washing Machine Error 23

JUjune
Asked over 6 years ago 2,421 views
0

Hi My brother has just fixed my Bosch Washing Machine Error Code 23. But now needs the combination to clear the front display panel , Please can anyone help. Thanks June Ps Bosch are coming on Tuesday call out charge £90 greedy

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Bosch washing machine showing E23 after water on float switch area

The problem
A Bosch washing machine displayed error code 23. The owner reported water on the float and rubbish behind the blue disc, which had been cleaned/fixed, but the display still showed the fault and they wanted a reset combination.
Likely cause
The discussion supports an anti-flood/float switch fault still being detected. The accepted advice was that Bosch error codes normally clear automatically once the underlying fault is properly rectified, so a remaining indication suggests the float switch may still be activated or the fault condition has not fully cleared.
What fixed it
No reset code or button combination was confirmed. Recommended action was to recheck that the float switch is no longer stuck on and that the water/rubbish issue has been fully cleared. If the fault remains after that, further diagnosis should be carried out by a suitably qualified appliance engineer.
Checks to try
  • Checked for water on the float
  • Found rubbish behind the blue disc
  • Advised to check whether the float switch was still stuck on

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 12 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

3 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 6 years ago

Normally any error code should clear as soon as the fault has been fixed. An error code is triggered when a fault is detected but if fixed it should no longer detect the fault.

Whitegoods Help — appliance repair expert and forum host.
0
JU
june
Answered over 6 years ago

Hi there was water on the float and lots of rubbish behind the blue disc . All fixed I need the code to reset. Please can any one help Thanks June

0
WH
WhitegoodshelpVerified Engineer
Answered over 6 years ago

There isn’t any code to reset that I know of. Otherwise every time a fault occurred on a washing machine we’d have to get an engineer to reset it. Are you sure the float switch is not still stuck on?

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.