Noise

Question

I have hotpoint washer/Dryer  it has a hell of a noise you can’t here yourself speak l

i have replaced a broken concrete block,Both shock absorbers

the bearing are perfect

any ideas please thanks for reading

Whitegoodshelp · Accepted Answer

Hello Grahams. It looks like you've covered most of the main causes of noisy washing machines - especially a very loud noise. Unfortunately I can't guess at anything because you haven't described the noise (although it's difficult to describe noises accurately). The only thing I can suggest is to painstakingly go through all of the possible causes in my two articles on the subject staring here - Washing Machine is noisy

Grahams · Answer

Hi Andy

i have read them so I am going to check some out

my model number AQM8d69I

IF IT IS THE bearings can they be replaced

Whitegoodshelp · Answer

Hello. If it's drum bearings it should be obvious if you spin the drum by hand with the belt taken off. It should rumble. I would advise against trying to replace drum bearings. Too big  a job, too many potential complications such as finding drum shaft or spider damaged and bearings seized in drum and won't come out - plus most modern washing machines only have complete drums available with bearings already fitted at great expense. You'd have to put your model into a spares site to see if they are available.

Find a fault like yours

Noise

3 Answers

Your Answer

Related Questions

Washing machine grinding sound before drum spins- is it definitely the bearings??

Making a banging noise, now won't rotate: (Whirlpool top loader). Advice appreciated!

Knocking sound in vintage Hotpoint First Editions 1000 - suggestions please!

Clicking noise on Midea (Logik) washer

Rattling chain noise - Siemens washing machine

HISENSE 5S Series Auto Dosing WF5S1245BW bangs loudly on high spin

Hisense washing machine very noisy spin

Miele Washing Machine (Spinning Noise)

Drum noise when turned by hand

Bosch Series 8 weird noises

Need an engineer?

Need a spare part?