Hisense f17 error

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Hisense washer dryer F17 error on drying cycle

The problem

A Hisense washer dryer completes wash cycles normally but shows F17 only when a drying programme is selected. The user had read that F17 indicates no water reaching the condenser.

Likely cause

Most likely a failed solenoid supplying water to the condenser, or a blockage at the condenser water entry. Because washing and rinsing work normally, the fault is likely limited to the condenser water feed rather than the main water supply.

What fixed it

Check for a blockage where water enters the condenser. If the condenser feed solenoid has failed, replace it. If it is part of a double or triple water valve assembly, the whole valve assembly would most likely need replacing. The thread was marked solved, but no completed repair or final confirmation was posted.

Checks to try

• Confirmed the machine washes and rinses normally
• Fault occurs only on the drying cycle with F17
• Check for blockage at the condenser water entry

Parts or tools mentioned

• Condenser feed solenoid
• Double or triple water valve assembly