Hisense JF 1 part has come loose
Hello, I’m new to the forums. My other half has got a sock trapped in the door and so we have a big flood. After taking the machine out, cleaning, drying and putting the machine back I’ve spotted a part on the floor that has come loose from my Hisense machine. It’s labelled JF 1 and is as pictured below.
Does anyone know what it is and where it needs to go back? I’ve searched the part number online with no luck. Thanks in advance.
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Loose plastic part likely from transit packaging on Hisense washing machine
- The problem
- After a sock was trapped in the door and caused flooding, the machine was removed, cleaned and dried. A loose plastic part marked 'JF 1' was then found on the floor, and its location on the Hisense washing machine was unknown.
- Likely cause
- The accepted reply says the part appears likely to be from the machine's transit packaging rather than a working internal component. It was described as the type of plastic spacer often fitted between the back of the outer drum and cabinet for transport, usually used with transit bolts.
- What fixed it
- Check the instruction manual for the transit packaging and removal illustrations to identify the part. No repair or refitting location was confirmed in the discussion.
- Checks to try
- Visual identification of the loose part marked 'JF 1'
- Suggested check of the instruction manual for transit packaging diagrams
1 Answer
Hello Peter. That looks like it could be part of the transit packaging. Have a look in the instruction manual to see if it shows you how to remove the transit packaging. It may show a picture of it. Plastic things like that are often used as spacers between the back of the outer drum and the back of the cabinet. A large screw or bolt then pushes through the back of the cabinet, through the spacers, and then screws into the outer drum to hold it solid while being transported. There are normally 3 of them.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Hotpoint F7 E2 Fault
1 answer • 1 reply
My Bosch washing machine is stuck on 33 minutes remaining
1 answer • 1 reply
Bosch washing machine door lock accidentally triggered with the door open – how I reset it
0 answers • 2 replies
Cant identify the correct replacement carbon brushea
0 answers • 2 replies
LG washing machine making intermittent noise — video link included
1 answer • 4 replies
Washing machine beeps then shuts down
1 answer • 1 reply
Candy washing machine below slip
1 answer • 1 reply
No longer starts.
1 answer • 3 replies
Mould keeps building up in my washing machine tray
1 answer • 1 reply
AEG Loud Knocking on Spin
0 answers • 1 reply