Hi guys
I'm after a little advice. When pushing back in the washing machine my partner pushed on the top where the touch screen is and made it loose and pushed it in a bit.
I have attached some pictures. Is this as simple as taking off the top of the washing machine and pushing back in?
Thanks a lot
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Washing machine touch control panel pushed in
- The problem
- The touch screen/control area on the top front of the washing machine was pushed in and became loose after the appliance was moved back into place.
- Likely cause
- Physical displacement of the touch screen/control panel fascia from being pressed during repositioning.
- What fixed it
- The accepted advice was to disconnect the washing machine from the mains and check whether the panel can simply be pushed back into place, ideally without significant dismantling. No confirmed repair steps or final user confirmation were provided.
- Checks to try
- Panel became loose and was pushed in after pressure was applied while moving the machine
- Accepted advice to ensure the appliance is fully disconnected from the mains before attempting access
Safety: Disconnect the washing machine from the mains before attempting to access or reposition the control panel. Further diagnosis should be carried out by a suitably qualified appliance engineer.
1 Answer
Hello there. Yes, obviously make sure it is totally disconnected from the mains. Hopefully you can get to it and just push it back into place without having to dismantle much or anything.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Hisense washing machine not working
1 reply
No water in the drum after EF3 fault
4 replies
Hisense washing machine 001 code
6 replies
LG F1222TD PCB
5 replies
Bosch series 6 washer / drier stuck on 0.00 time and will not respond to any button
1 reply
Miele WEG365 WCS: drain fault and pump cavitation after transport - looking for W1/PowerWash expertise
2 replies
Water leaking from drain filter
1 reply
Water leaking from drawer of Meile washing machine
1 reply
Bosch washing machine only spins sometimes
2 replies
Hoover Wsahing Machine NOT filling with ENOUGH water
3 replies