Solved

Washing machine keeps turning at end of cycle...what's happening?

BRBrianWash
Asked about 4 years ago 7,945 views
0

Hi, hope someone can help or advise with this.

Our Beko WTIK74111 washer completes a programmed cycle, but continues to turn the drum until a button is pressed (for hours after the cycle is programmed). This happens regardless of the type of programmed cycle.

Is this supposed to happen? Or is there something wrong with it?

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Beko WTIK74111 drum continues turning after programme end due to crease guard feature

The problem
A Beko WTIK74111 completed its wash programme but kept turning the drum until a button was pressed, on all programme types. The user wanted to know if this was normal or a fault.
Likely cause
The most strongly supported diagnosis is that the machine's crease guard feature was operating. This turns the drum intermittently after the cycle finishes to help reduce creasing if laundry is left in the drum.
What fixed it
Check the instruction manual for the crease guard setting and disable it if preferred. The discussion indicates the manual shows this feature and that it can be turned off. No fault repair was described.
Checks to try
  • Observed that the wash programme completed normally
  • Confirmed the drum continued turning after programme end until a button was pressed
  • Behaviour occurred on all programme types
  • Forum reply identified the behaviour as crease guard
  • Manual reference was given indicating the feature can be turned off
Cause identifiedGenerated 6 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

3 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered about 4 years ago

Hi. This sounds like what's called crease guard. It may or may not be able to be turned off. Have a look for it in the instruction manual.

The idea is that if you put laundry in for a wash, and then don't take it out of the drum for hours after finishing, then laundry can become badly creased. So turning the drum every so often prevents this.

Whitegoods Help — appliance repair expert and forum host.
1
BR
BrianWash
Answered about 4 years ago

Sounds good, will check it out 👍 thanks Andy!

1
AN
andyr12345
Answered about 4 years ago

here is the online manual - looks like feature can be turned off see page 21 out of 44 :

https://media.flixcar.com/f360cdn/Beko-73167156-WTIK74111.pdf

Your Answer

Sign in to share your expertise and post an answer.