Solved

Slamming Meile Washing Machine Door

NENeil H
Asked about 15 years ago 2,786 views
0

I recently bought a new Meile washing machine (W2859IWPMRS S). It is a great machine, however I have to slam the door quite hard to close this. My last Meile machine did not require this, is this typical, or would you think I have a problem with the door catch/lock?

Thanks

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

New Miele integrated washer door needs a firm slam to close

The problem
Owner of a new Miele W2859IWPMRS S reported the door needed to be slammed quite hard to latch, unlike a previous Miele machine, and asked if this was normal or a door catch/lock problem.
Likely cause
The strongest supported explanation in the thread is that some new Miele integrated washing machine doors are stiff when new and are intended to be swung shut firmly. A possible alternative mentioned was poor alignment of the integrated door panel or hinge fit, but this was not confirmed.
What fixed it
Accepted advice was that the door should be swung shut firmly and that it may ease off with use. If it will not shut in the normal firm-slamming manner, the thread suggested checking door-panel and hinge alignment visually and consulting the dealer or installer. No actual fault repair was confirmed.
Checks to try
  • Visual check of integrated door panel alignment
  • Visual check of hinge fit/cut-outs
  • Tried closing by pushing firmly where the catch is
  • Compared behaviour with Miele guidance that the door should be swung shut firmly
Cause identifiedGenerated 16 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

6 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered about 15 years ago

I remember being surprised with my Miele washing machine when the instruction book said that to close the door you should swing it shut, sort of slamming it shut. It should ease off after a while but they are quite stiff to close at first.

However, the door and catch should be of sufficient quality to cope with the slamming. Mine is 14 years old with no issues.

Whitegoods Help — appliance repair expert and forum host.
0
MU
Murphy
Answered about 15 years ago

Hi Neil,

Could be a couple of small issues here. The integrated door panel may be too heavy (least likely)or poorly fitted and is not aligning too well, also the hinge barrels on Miele's are deeper than most and they may not be fitting the door hinge cut outs too well, which will make it very difficult to close. Check these visually and consult the dealers/installers first if any doubts.

The integrated doors are usually a bit more difficult to close. Try closing the door by pushing the door firmly where the catch is, so all your effort is used in making the latch and lock meet. If you are just pushing the door for example at the top it will be difficult to get it to close easily.

Regards

0
RI
richardlee1985
Answered almost 15 years ago

Hello, I have recently bought a Miele W2839i integrated washing machine and i have to do exactly the same to get the door to shut! I have tried pushing it shut but that does not work so the only way to get it closed is to give it a good slam.

Richard

0
ST
stephen ball
Answered almost 15 years ago

You are not alone, my wife cannot close the door of our brand new Miele Washing Machine W2819i. The door will close if you use brute force , but I am talking significant force the sort that could move the earth on its axis - not what you would expect when it comes to something as expensive as a Miele.

We have telephoned Miele three times and their view continues to be that the doors just need a good slam and that is that! Begrudgingly they are now sending out a technician but the reputation surrounding Miele has already become tarnished in our eyes whatever the outcome. Certainly the help desk "attitude" could be more helpful and the culture that comes across is one that sees the customer as the problem.

Anyway the technician comes out on 9th November (Comments like 'they first check it is plugged in safely' and that 'if we are not in when they call we have to pay a £60 charge' etc etc to be honest just alienate me) - we might be proved wrong and it will be interesting to find out what the problem is - even if it turns out that we are just physically too weak to use their Miele machines!

Stephen

0
WH
WhitegoodshelpVerified Engineer
Answered almost 15 years ago

This video shows a Miele washing machine being subjected to a repeated door slam test. It shows how you can slam a Miele door to close it. If you can't get yours to slam shut as in this video there may be a problem that needs fixing.

Miele washing machine door impact testing

Whitegoods Help — appliance repair expert and forum host.
0
FL
flybynspotthejoker
Answered over 9 years ago

Thanks Andy - I came to the conclusion that the thread fizzled out (or came to natural conclusion) due to the excellent 'this is how we slam' video that was posted by you - thank you

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your appliance.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your appliance needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice