Solved

Tricity Bendix Aw1201 W - Programme Dial Fault

MZmzvxdpdh
Asked about 14 years ago 2,115 views
0

Hi,

I would welcome any comments on this problem I have with a Tricity Bendix Washing machine.The programme dial won't hold, very loose and can be turned easily and doesnt click to any programme.

No lights will come on. I have powered off and on at the mains and no change, used a different socket etc. This worked fine yesterday and the cycle finished as usual but won't work today.

Any help appreciated.

Regards

D.

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Tricity Bendix AW1201 W programme dial loose with no power indication

The problem
On a Tricity Bendix AW1201 W washing machine, the programme dial became very loose, turned freely and no longer clicked into programme positions. No lights came on. Power cycling at the mains and trying a different socket made no difference. The machine had completed its previous wash normally the day before.
Likely cause
Most strongly supported diagnosis is a fault in the programme selector area: either the mechanical timer internals have broken, if this model uses a mechanical timer, or the control knob itself is broken. Exact cause was not confirmed.
What fixed it
The accepted advice was to have the machine inspected, or strip down the control area to look for a broken knob or timer mechanism. No completed repair was documented.
Checks to try
  • Powered off and on at the mains
  • Tried a different socket
  • Observed programme dial turned freely and did not click
  • Observed no lights illuminated

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 19 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered about 14 years ago

If it's a mechanical timer, and normally has resistance when turned and makes clicking sounds the mechanics inside could be broken but it may well just be the control knob that's broken. Nothing to suggest really other than to either get someone in to look at it or try to strip it down to look.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.