Bosch Not Heating Water / Filling With Water ?

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Bosch WAB28061GB appears to heat normally and uses a low water level

The problem

On a newly installed Bosch WAB28061GB, the owner was concerned that the machine might not be heating water on a 60 degree wash because the door glass felt cold, and was also unsure whether enough water was entering because there was no visible pool of water or many suds.

Likely cause

No confirmed fault. The discussion supports that modern washing machines use much less water than older models, so the door glass may not feel hot and the water level may not be visible in the door area.

What fixed it

The accepted advice was that many washers use very little water, so a cool door glass is not necessarily a sign of a heating fault. The owner then reran a 60 degree wash and found the door glass became warmer during the cycle, leading them to conclude it was heating. No repair was required or confirmed.

Checks to try

• Ran another 60 degree wash
• Checked whether the door glass became warm during the cycle
• Observed that no visible pool of water was present in the door window
• Observed low suds