Solved
Bosch

Bosch W/m Erratic Heating On Different Wash Programmes

JIjivebunny
Asked over 13 years ago 3,005 views
0

I own a Bosch washing machine WAA28160GB/04 and for a while the washer has been either heating the water to boiling point or not warm enough for the wash or just cold. The 40C wash would boil and the 30c wash would be nearly cold. The heating of the water would be erratic depending on the program. I naturally thought the fault was with the thermostat of which I have recently replaced. The water heating is not as erratic as before but the washes are still too hot or too cold for the program.

Could this be a fault with the PCB or some other component?

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Bosch WAA28160GB/04 erratic wash temperatures on different programmes

The problem
Bosch washing machine WAA28160GB/04 was heating inconsistently depending on programme: some washes overheated to near boiling, while 30C and 40C programmes could run too cold or too hot. The temperature control fault had been present for some time.
Likely cause
Temperature regulation fault not resolved by replacing the thermostat. A PCB fault was suggested as a possibility, but no diagnosis was confirmed.
What fixed it
The accepted advice was not to buy a replacement PCB speculatively because it is expensive and may not cure the fault. Further diagnosis should be carried out by a suitably qualified appliance engineer.
Checks to try
  • Thermostat had recently been replaced
  • Observed overheating on some programmes and insufficient heating on others
Parts or tools mentioned
  • Thermostat
  • PCB
Professional repair recommendedGenerated 16 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 13 years ago

I would get an engineer out for this one. It could be a pcb issue or maybe something else. I definitely wouldn't buy a pcb, they are expensive and you can't send them back if it doesn't cure the fault.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your Bosch.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your Bosch needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice