Solved

What's The Difference In These? (Apart From Price)

PApauley987
Asked over 12 years ago 6,412 views
0

Hi guys

Simple question from a complete novice at these things.

My washing machine inlet hose is leaking at the tap. It's not a standard hose, it's It's got a waterstop on the end to make it compatible with the AEG anti flood feature. The washer dryer is an AEG L14850

I had a plumber in and he changed the tap which was very old anyway. The washer inside the valve is fitted with some sort of filter and he didn't think it was standard. Anyway, a few hours later and Now it's leaking again, though not anywhere near as much.

So I guess I'm looking for a new inlet hose.

When looking on the AEG site there are two extremely similar looking devices, the only difference appears to be the colour plus the price.

The one that I have already is listed at £43 and the similar looking one is £23.

Same as what I have now - http://shop.aeg.co.uk/product/3792785028/Washing+Machine+Inlet+Hose+Assembly

Similar one - http://shop.aeg.co.uk/product/50284341000/SAFETY+SYSTEM+1.5m+Inlet+Hose

Your advice would be appreciated.

Many thanks

Paul

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

AEG L14850 inlet safety hose leaking at tap

The problem
The washing machine inlet hose was leaking at the tap. The appliance is an AEG L14850 and uses a non-standard inlet hose with a waterstop/anti-flood safety fitting. After the tap was replaced, the leak reduced but continued.
Likely cause
The discussion supports the inlet safety hose assembly as the likely source of the problem. There was also mention of a filter/washer arrangement in the valve that did not appear standard, but no definite fault with the tap or filter was confirmed.
What fixed it
Recommended action was to replace the hose with the safety hose specified for the AEG L14850, rather than risk using the cheaper similar-looking alternative. The accepted reply noted the cheaper hose might fit, but advised buying the one confirmed for that exact model.
Checks to try
  • Leak was observed at the tap connection
  • Tap had already been changed
  • Existing hose identified as a waterstop/anti-flood type
  • Model given as AEG L14850
Parts or tools mentioned
  • AEG L14850 safety hose/inlet hose assembly
  • Alternative similar 1.5 m safety system inlet hose

Safety: Use the hose confirmed for the exact model. Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 11 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 12 years ago

The safety hose for an AEG L14850 is available from Ransom Spares. The cheaper one looks like it's made from a different material, could possibly be shorter (1.5 m) and looks like an older design. The cheaper one may well fit, but I;d go for the one which says it's definitely for that model.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.