Solved
LG
F1406

Noisy LG Steam Washing machine (F1406 TDSP)

FOfooey
Asked over 8 years ago 6,053 views
0

Hi All,

I have a LG Steam washing machine which is about 10 years old. It's served me well throughout the years but recently, it's developed a couple of faults.

Every so often, a small amount of water will leak out of the washing machine.

During the rinse cycle, the washing machine will make a tremendous racket - it sounds as if the drum is empty bar a few bouncy balls inside. Gently placing my hand on top of the washing machine doesn't make me feel like there's too much side to side movement.

I tried spinning the drum when empty by hand and the noise I described was absent.

Any ideas?

Many thanks.

LGwm.mpg

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

LG F1406 washing machine noisy on rinse with occasional small leak

The problem
An LG Steam washing machine, model F1406 TDSP/F1406, around 10 years old, was reported to make a very loud rattling noise during the rinse cycle, described as like a few bouncy balls inside the drum. A small amount of water also leaked out occasionally. When the drum was spun by hand while empty, the noise was not present, and the user did not feel excessive side-to-side movement from the top.
Likely cause
The strongest diagnosis in the discussion was that something was loose, most likely the motor or a drum weight. The leak was mentioned by the user but no confirmed cause for the leak was identified in the thread.
What fixed it
Recommended action was to disconnect the appliance from the mains, remove the lid and back panel, and listen/observe to locate the source of the noise, then physically check for loose components by shaking accessible parts. The exact repair was not confirmed in the discussion.
Checks to try
  • Drum spun by hand when empty and noise was absent
  • User noted no obvious excessive side-to-side movement from the top of the machine
  • Advice to remove lid and back panel to locate the source of the noise
  • Advice to check for loose parts by shaking components with the machine disconnected from the mains

Safety: Disconnect from the mains before removing panels or checking for loose components. Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 14 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered almost 8 years ago

Sorry for late reply. It's probably resolved by now but it sounds like something like the motor or a drum weight is quite loose. With noises you have to take off the lid and back panel and locate where the noise is coming from by listening and observing. Totally disconnect from the mains and shake everything about to identify loose bits or replicate the noise.

I have 2 very comprehensive help articles here

Noisy washing machine causes

More causes of a noisy washing machine

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your LG.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your LG needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice