Hoover washing machine clicking sound
Hi everyone,
My hoover washing machine makes a clicking sound as the drum spins. If i take the belt off it stops.
Does anyone know what it could be please?
Thanks
Joe
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Hoover washing machine clicking from motor area
- The problem
- A Hoover washing machine made a clicking sound while the drum was spinning. The noise stopped when the drive belt was removed. The original poster then found there was no noise when the drum was spun by hand from the front, but the clicking was present from the motor when the motor spindle was turned by hand with the belt off. A burning smell had also been noticed during use.
- Likely cause
- The strongest diagnosis in the discussion was a loose commutator on the motor armature. This was suggested because the clicking was traced to the motor rather than the drum, and was accompanied by a burning smell.
- What fixed it
- The recommended action was that the motor would likely need replacing. The thread was marked solved, but no final confirmation of the exact repair being carried out was posted.
- Checks to try
- Drive belt removed and noise stopped
- Drum spun by hand from the front with no noise
- Motor spindle turned by hand with belt off and clicking heard
- Burning smell reported during operation
Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.
3 Answers
If you take the belt off then spin the drum by hand from the front can you hear it?
Need Professional Help or Spare Parts?
Hi Andy ,
No there is no noise if i spin it from the front.
The clicking noise is coming from the motor even when i turn the spindle with the belt off.
The wife said she could smell burning when it was running.
Ok. With you saying initially that the noise stops when the belt is taken off it implicates the drum (or even the belt) but if it is clicking when you turn the motor by hand it sounds like a loose commutator on the armature - especially if combined with a smell of burning. Chances are the motor would need replacing.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Hoover H-Wash & Dry 350. HELP !
1 answer • 2 replies
Hi I have just wasted 2 hours trying to get help for a hoover washing machine
1 answer • 2 replies
Hoover Otsein Next 3650T/1-37 error E03
1 answer • 2 replies
Hoover Washer stopping 1-2 minutes into cycle
1 answer • 3 replies
Hoover counterweight replacement
1 answer • 2 replies
Hoover Vision VHD 9143 ZD
1 answer • 11 replies
hoover VTS714 D21 wont spin
1 answer • 5 replies
Hoover VT 814D21-80 not working
1 answer • 4 replies
Hoover Visiontech washing machine fault
1 answer • 4 replies
Hoover wdyn 9646pg-30s shut down after 15 sec
1 answer • 11 replies
