Hoover washing machine error
Hi, I have a Hoover hbwdo8514tahc-80 washing machine that has stopped working and displays an error I can't see any reference to anywhere in the book or on the web!
When selecting any cycle (wash or dry) it starts draining, then I hear it fill but can't see water in the drum then I hear the drain gurgle like it's draining and it just stops with an error that is eeo, picture attached...
I have checked and cleaned the filter, taken to top off and see that all pipes are connected, any ideas?
Thanks in advance!
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Hoover HBWDO8514TAHC-80 showed unreadable 'EEO' style error and then reset after being left unplugged
- The problem
- Hoover HBWDO8514TAHC-80 stopped on any wash or dry cycle. It would begin draining, appear to fill without visible water in the drum, then sound as if draining again and stop with an unreadable display error described as 'eeo'. The filter had already been cleaned and visible pipe connections checked.
- Likely cause
- The accepted reply said the display was not a recognisable Hoover fault code and was most likely due to a problem with the control panel and/or main PCB. This was a probable diagnosis rather than a confirmed fault.
- What fixed it
- No repair was confirmed. The machine was left unplugged overnight and the original poster reported that this appeared to reset it and it worked again. The accepted advice was to use Hoover's parts guarantee and consider a manufacturer repair if the fault returned.
- Checks to try
- Cleaned the filter
- Removed the top and checked that pipes were connected
- Left the machine unplugged overnight to reset it
- Checked remaining Hoover 5-year parts guarantee
Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.
2 Answers
Not sure what that display is supposed to be. It’s neither number nor letter is it?
Hoover tend to user letters and numbers for error codes like E03 so yours can’t even be looked up because it’s gobbledygook. Maybe something’s gone wrong with the control panel and/or the PCB.
I’d look into the Hoover parts guarantee as many have 5 or 10 year parts guarantees though unfortunately the labour cost is likely to be around £100. But at least Hoover may quote you a fixed price repair.
Need Professional Help or Spare Parts?
Thanks, I did check and I'm in luck and have 3 months left on the 5yr parts guarantee...
Although I left it unplugged all night and day today and that has seemed to reset it, so it works again. But I guess it's only a matter of time ..
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Hoover H-Wash & Dry 350. HELP !
1 answer • 2 replies
Hi I have just wasted 2 hours trying to get help for a hoover washing machine
1 answer • 2 replies
Hoover Otsein Next 3650T/1-37 error E03
1 answer • 2 replies
Hoover Washer stopping 1-2 minutes into cycle
1 answer • 3 replies
Hoover counterweight replacement
1 answer • 2 replies
Hoover Vision VHD 9143 ZD
1 answer • 11 replies
hoover VTS714 D21 wont spin
1 answer • 5 replies
Hoover VT 814D21-80 not working
1 answer • 4 replies
Hoover Visiontech washing machine fault
1 answer • 4 replies
Hoover wdyn 9646pg-30s shut down after 15 sec
1 answer • 11 replies