Solved
LG

LG DD loud when spinning

SASAR
Asked over 4 years ago 3,350 views
0

Hi people,

Had my LG washing machine for a while and has run smoothly until the last few weeks where it is very loud on spin, like very loud. It’s like a grinding noise.

Any ideas / help on sorting the issue out?

Short clip os attached

Thanks in advance

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

LG direct drive washing machine very loud with grinding noise on spin

The problem
An LG direct drive washing machine, about 8 years old, had recently become very loud on spin with a grinding-type noise. No fault code was mentioned.
Likely cause
The strongest suggestion in the discussion was worn drum bearings. This was based on the reported grinding noise during spin and the advice to check for play by lifting the top lip of the drum. This remained a diagnosis only and was not confirmed by a completed repair.
What fixed it
Recommended checks were to disconnect the machine from the mains, remove the back panel, inspect for anything loose, and spin the drum by hand. A further check suggested was to open the door and push the top lip of the drum up and down to see whether there was any movement. If nothing obvious was found, the advice was that an engineer would need to observe the machine in spin to locate the source of the noise. No completed repair was confirmed by the original poster.
Checks to try
  • Disconnect the washing machine from the mains
  • Take off the back panel and look for anything loose
  • Spin the drum by hand
  • Open the door and push up and down on the top lip of the drum to check for movement/play

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 18 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

7 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 4 years ago

Hello Sar. Unfortunately your video didn't work. I tried to re-upload it but I got a message saying it could not play and could be corrupt. Would you be able to upload it again please?

Meanwhile, can you also tell me is it a direct drive model, with no drive belt or separate motor?

Whitegoods Help — appliance repair expert and forum host.
0
SA
SAR
Answered over 4 years ago

Hi Andy,

it’s a Direct Drive, bought about 8 years ago. I’ve re-attached the video, hopefully you can see it this time.

Thanks

IMG_0596.MOV

0
WH
WhitegoodshelpVerified Engineer
Answered over 4 years ago

Hmm. No it still won't play. Never see this issue before. I get the error message -

"This attachment is not available. It may have been removed or the person who shared it may not have permission to share it to this location."

Whitegoods Help — appliance repair expert and forum host.
0
WH
WhitegoodshelpVerified Engineer
Answered over 4 years ago

Regarding noise, if it is a direct drive could be something to do with that. The only thing you can do really is to disconnect the washing machine from the mains, pull it out, take off the back panel, and have a look round to see if you can see or identify anything that may be loose. Try spinning the drum by hand.

If you can't find anything then an engineer would plug the washing machine in, put it on spin and carefully observe and listen to try and identify where the noise is coming from.

Whitegoods Help — appliance repair expert and forum host.
0
WH
WhitegoodshelpVerified Engineer
Answered over 4 years ago

It works ok on my mobile phone though.

Whitegoods Help — appliance repair expert and forum host.
0
AN
andyr12345
Answered over 4 years ago

IMG_0596.mp4

Sounds like could be bearings on the drum wearing out @SAR. - try opening door of washing machine and push up and down the top lip of the drum, there should be no movement / play there

1
SA
SAR
Answered over 4 years ago

Thanks Andy - I'll take a look and see what I can find.

Your Answer

Sign in to share your expertise and post an answer.