Solved
Hoover

Hoover Machine. All LED display lights onk

GUGuest
Asked about 4 years ago 5,880 views
0

Hello

All the LED display lights (and some of the button lights) are solidly showing on my washing machine. There is nothing in the manual about this and I'm drawing a blank searching about it. It's a Sensordry wdyn 8154d. So you have any idea how to reset it?

2 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered about 4 years ago

If all the LED display lights are flashing, this usually indicates that something has gone wrong. With most washing machines this is often an anomaly that shouldn't really be happening. Some washing machines may use it as a specific error code. Check the instruction manual to see if it says anything about all the lights flashing and what it means. If you can't see anything then it is probably one of those washing machines where it's not supposed to happen.

Apart from unplugging from the mains for several minutes, there isn't usually anything that can be done. If there is a fault, there is no way to "reset" because the lights are flashing because of a fault that would need fixing.

Whitegoods Help — appliance repair expert and forum host.
0
AN
andyr12345
Answered about 4 years ago

could be just a diagnostic mode and needs resetting to come out of it . all lights solid and not flashing just checking the display of the washing machine. I have a Hoover condenser tumble dryer and if I use a special selection of button press it puts it into 'diagnostic mode' and all the lights light up solidly on that. To reset though and come out of that though all I have to do is just turn the dial to 'off' wait a few seconds and then turn the dial again and it clears .

Your Answer

Sign in to share your expertise and post an answer.