Washing Machine Repair Forum
Front and top loaders that won't spin, drain, fill or finish a cycle - plus error codes, bearings and pumps.
Recent Questions
Hoover DXOA410C3 - is this noise normal?
Hello, I've got a Hoover DXOA410C3 which is about 2 months old now, and I've noticed it makes quite a loud whining noise when you turn the drum (by hand or when the motor turns...
Replacing hinge on Bosch Exxcel 8 VarioPerfect
I am looking to replace the hinge on my Bosch Exxcel 8 VarioPerfect. The hinge seems readily available but I am unable to work our how to take the door apart. In the past doors...
Hoover HBWD 7514DA-80 Fault E21
Hello, I hope you can help. Today my washerdryer model Hoover 7514da-80 showed fault code E21. I can't even find online what this code refers to. I have looked at the discharge...
Bosch washing machine tripping fuse box
WAQ243D1GB/09 Advice needed. My Bosch washing machine has started to trip my fuse box a couple of minutes into it’s cycle...however I am able to run the drain cycle and quick wa...
CANDY Machine repair advice - seeking an engineer
Hi. A little before Christmas, our (13 month old) washing machine packed in. We did a bit of investigating locally and found an engineer with good feedback. He came out and asse...
bush washing machine repair.
hi guys. i have a bush f721qb washing machine which i have replaced the door seal. so i have put it back together and all im getting is start light and stop lights are just flas...
iDos dispenser always low
VarioPerfect Serie 8. IDos dispenser is showing low detergent all the time. Even after filling up to max. It began so after I accidentally dropped too much detergent for the dru...
Bosch machine door
Hiya all.Ive got a bosch wtn85201 c9ndenser dryer with a cracked door glass.I have the replacement part but I just cannot work out how to dismantle the door.There are no visible...
Maytag MWA 09149
Hi guys bought a second hand maytag MWA 09149 a few weeks ago, but now we have a fault, machine lights up but wont start, it is showing no faults, so far i have checked the heat...
TwinDos
Hi Forum Got a Miele WKG 130 - NDS with TwinDos, however when I try to run the TwinDos maintenance it only works on container 2 - with a TwinDosCare container - when the TwinDos...
Peter Moroney
Hi I have a Logik Washing Machine , it switches on and sounds like it's trying to start a cycle , it seems to be trying to pump out all the time then E21 for blockage shows but...
Bosch Classixx 1200 Express Drum Stability
Youtube Video I've made a video of the problem. I'm an electronics engineer, so not daft. I've checked the springs which seem fine, as do the dampeners. The concrete also seems...
Hotpoint wml520 aquarius washing machine fault
hi I have a Hotpoint wml520 aquarius washing machine. It has just stopped mid cycle after making an odd noise and the drum will now no longer turn. i have taken the back off to...
Tapping, banging and whistling on spin
I've had the machine for about 4 months. It makes tapping noises. banging noises, high pitched whistle when spinning and has developed a creaking noise recently. I've levelled i...
Drum fallen in washing machine where do the spring attach to?
Hello, I have an indesit washing machine and the drum has dropped. I need to attach this again but not sure where the springs attach to. There are a couple of holes on the side...
Indesit IWE 91481 Door Issue F06
Hi, I would much appreciate any help with the following. The Door on my Indesit is permanently locked with the door lock symbol on the control panel illuminated. I can open it w...
Advice please
Hi I have a Hotpoint washer and over the last few days it's making what sounds like a squedgy noise at the end of a spin..no noise during .. I've cleaned out the drain filter.....
BEKO 7 kg Washing Machine.
Machine stopped in mid wash cycle. The fuse at the switch on the wall was blown. Replaced the entire switch but machine not coming on. No lights ziltch. I don't know if there is...
hotpoint aquarius all flashing lights
all flashing lights on the front so I took off the small pump attached to the floor of the machine and the impellor is spinning freely and when I put water in the machine it see...
I suspect my drum has broken
Hi all, I looked through a lot of information but can't figure out what part of the machine has broken and why? Hopefully I can find some advice. I have a hotpoint aquarius wdal...