Solved
Beko
WMA510

BEKO WMA510 - weird high pitched noise

LYLylio
Asked about 8 years ago 2,288 views
0

Hi there,

Our BEKO WMA510W Washing Machine has started making a weird high pitched noise. I've made a brief video demonstrating what I mean - I turn the drum manually to give an idea of this odd noise, but it's quite pronounced when the machine goes into it's fast end spin cycle.

We're wondering if maybe the drum needs tightened or if this sounds like it means the machine is on its way out. I've asked BEKO about through Facebook, no reply yet. It would be great if you could have a look at the video and reply with any suggestions: https://www.youtube.com/watch?v=0phFzFIfV4s

Many thanks for your time.

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Beko WMA510 high-pitched noise likely from motor area

The problem
A BEKO WMA510W washing machine developed a high-pitched noise, noticeable when the drum was turned by hand and more pronounced during the fast final spin.
Likely cause
The accepted reply pointed to the motor area rather than the drum. A further comment suggested the motor carbon brushes, with a raised commutator bar on the armature as a possible cause. This was suggested, not confirmed.
What fixed it
Recommended action was to disconnect the appliance from the mains, remove the belt, check that the belt was not catching on anything, then spin the drum and the motor spindle separately to identify whether the noise came from the drum or the motor. The thread was marked solved, but no final repair or confirmed fix was posted.
Checks to try
  • Disconnect from mains before checking
  • Remove the belt
  • Check whether the belt is catching on anything
  • Spin the drum with the belt removed to see if the noise remains
  • Spin the motor spindle to compare the noise source
Parts or tools mentioned
  • Drive belt
  • Motor
  • Carbon brushes
  • Armature

Safety: Disconnect from mains before carrying out any checks. Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 12 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

3 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered about 8 years ago

It sounds like the motor. Disconnect from mains. Take off the belt and ensure it’s not catching on anything then spin the drum to see if the noise has gone or is still there. Try spinning the motor spindle too

Whitegoods Help — appliance repair expert and forum host.
0
LY
Lylio
Answered about 8 years ago

Cheers for the reply Andy.

0
WH
WhitegoodshelpVerified Engineer
Answered about 8 years ago

It sounds like the noise is coming from the carbon brushes on the motor. A raised comm bar on the armature is one of the possible causes.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.