Home

Washing Machine Repair Forum

Front and top loaders that won't spin, drain, fill or finish a cycle - plus error codes, bearings and pumps.

Got a washing machine fault?

Describe your problem and get free help from UK engineers and experienced DIYers - most questions get a reply within hours.

Recent Questions

Solved
Washing Machines
JPAsked by JPH

Height reduction kits for washer

How can I find out which washer on the market can be fitted with a height reduction kit? They all seem to have a height of 85cm, and I need to reduce it to a maximum of 83cm. Wo...

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
TAAsked by Tas

I need a washing machine with a smaller width

I've just bought my first house and I'm trying to find a washing machine that will fit the space i have. The measurements are 23 inches width, 22 inches depth and 34 inches in h...

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
STAsked by stephenjames

Widl126 uk .bin file required

Can any body help me with the correct file for this machine? The washing machine side is ok but locks up when asked to tumble dry.The machine is cold fill only. Kind Regards steve

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
Beko
MAAsked by manuk

Beko WM6133S drum not turning when loaded but turns when empty

Hi I have a Beko WM6133s when I load the machine and turn it on the drum does not turn but if i unload the machine then turn it on the drum works any idea what could be wrong or...

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
LG
MAAsked by MancSki

LG f1443kd drain pump replacement

This isn't so much a question as a repair report, hope that's appropriate. I've spent the last couple of days exploring this machine which was making a very rough buzzing noise....

Latest reply about 10 years ago by Whitegoodshelp

Can't find your fault?

Ask about your washing machine and get a tailored answer from our community.

Solved
Washing Machines
Siemens
BBAsked by BB8

Help needed for Siemens IQ500 WM16W950GB

Hi, recently purchased a Siemens IQ500 WM16W950GB washing machine. Used it on Saturday for 1st time, dried the rubber seal and tray, and let it ventilate for a while and then cl...

Latest reply about 10 years ago by BB8
Solved
Washing Machines
Indesit
KEAsked by Kezza

Indesit IWB 71250 Washing Machine

Hello, my machine starts, fills with water, then stops. You can hear it clicking... but then nothing. It had been working perfectly up until today. Any ideas at all please?

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
Hoover
CHAsked by chris harrison

Hoover washing machine stops

Hi, we have a Hoover top load machine. Sometimes it will stop during the wash program but the timer dial keeps going. I turn it off at the dial and open the lid and then go back...

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
Hotpoint
PRAsked by Predator

Hotpoint wm52 bearing seal

Hi I have fitted new bearings and spider but whitch way around should the seal go when looking down into the plastic drum should the spring in the seal face the bearing or face...

Latest reply about 10 years ago by Predator
Solved
Washing Machines
Bosch
BOAsked by bodge

Keeps Stopping During Cycle F17 Error Bosch

HI I have a bosch avantixx approx 5 years old and it keeps stopping during the cycle flashing up the F17 Error It first stops about 10 minutes into the cycle with the F17, it se...

Latest reply about 10 years ago by Whitegoodshelp

Can't find your fault?

Ask about your washing machine and get a tailored answer from our community.

Solved
Washing Machines
Miele
GEAsked by geordief

Waterproof System. in the Miele W19 wps Washing Machine

Can this be safely removed and replaced with a regular hose? Miele are very reluctant to countenance this but will not provide me with technical information without a call out....

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
FIAsked by FirstSpear

Lid Screws AND Rivet!

Hidy. Examining door lock problem yesterday, wiring connector from lock badly scorched, so decided to replace wiring as well. Pulled out machine a bit. 4 screws in top and, unbe...

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
BEAsked by bev1505

Help - I've lost the emergency drain hose!

I have a Samsung Eco Bubble washing machine which needed a debris filter clean. I pulled out the drain hose to empty the machine but when trying to push back the drain cap the t...

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
KAAsked by Kaloyanides

Drain Issue | Need Help!

Hello! I'm in desperate need of some assistance. Many thanks in advance if you take the time to read/respond. I have an LG WM2010CW Washing Machine. It won't drain. With a small...

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
RPAsked by ray purchase

Is a cold fill washing machine economical to run?

Hello, I am new to the world of washing machines and have recently read a great deal in a short time. I am buying a machine for a housing association. I read around and it seems...

Latest reply about 10 years ago by ray purchase

Can't find your fault?

Ask about your washing machine and get a tailored answer from our community.

Solved
Washing Machines
Bosch
BUAsked by busted

Bosch WFL2450 won't go past first step

Bosch WFL2450 will start then not get past the first step. It will fill, then you hear a snick as it tries to go onto the next step but doesn't get there. It pauses for a short...

Latest reply about 10 years ago by busted
Solved
Washing Machines
Hotpoint
AJAsked by Ajazahmeduk

Hotpoint BWD129 door locked light flashing

Hotpoint BWD129 door locked and only door lock light flashing washing machine works fine and drains fine door can be opened with piece of string have changed door interlock but...

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
MAAsked by manuk

Can damp cause pcb to blow?

Hi I have bought a reconditioned machine but 3 weeks later it broke the company that sold the machine came out the next day and said that there was excessive damp behind the mac...

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
Samsung
WAAsked by Wash339

Samsung p1253 turn it's off and on during wash

I have a Samsung p1253 washing machine all working fine in till it is put on any wash cycle, the machine every so often during the wash will turn itself off without giving a fau...

Latest reply about 10 years ago by Whitegoodshelp
Solved
Washing Machines
Indesit
DAAsked by dasyurus

Indesit Moon caught fire

We had an Indesit moon for about 10 years now. It did not get a lot of hard use only used the weekends. It was not overloaded. I would like to warn anyone on these machines on t...

Latest reply about 10 years ago by Whitegoodshelp

Top Contributors

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your appliance.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Shop

Fix it yourself for less. Find the right part for your appliance and order it direct.

  • Search by your full model number
  • Genuine and compatible parts
  • Fast 1–3 day dispatch