Washing Machine Repair Forum
Front and top loaders that won't spin, drain, fill or finish a cycle - plus error codes, bearings and pumps.
Recent Questions
Second Hand Or New?
Hi, I am living on my own in rented accommodation, and am likely to only be here for maybe 3 months or so. It seems like a waste of money to buy a brand new washing machine, as...
Bosch W/m Erratic Heating On Different Wash Programmes
I own a Bosch washing machine WAA28160GB/04 and for a while the washer has been either heating the water to boiling point or not warm enough for the wash or just cold. The 40C w...
Broken Belt Help
Hi, Id be very appreciative of any advice. My Zanussi machine has stopped. The drum appeared to have dropped and did kind of lift back into place but the drum wouldnt turn from...
Hoover Wdyns654D Keeps Filling Even On Spin Cycle
Hi folks, I would appreciate some help with solving this problem if possible When starting any cycle the machine fills with water as normal. The inlet valve solenoid then pulses...
Is This Normal Or Have I Been Mis Sold?
I have a beko washing machine which refused to spin. I looked it up on the Internet and decided the brushes were worn so I ordered new and my husband replaced them. That was abo...
What are Bosch like?
Hi, I have just signed up to this site which looks amazing and has loads of interesting information. Right, i am moving in soon so need to buy a washing machine. My parents have...
Stops During The Wash Cycle With Soapy Water In
Hi, My washing machine stops during the wash cycle with soapy water in. If I then put it on pump/spin, it pumps the water out in under a minute, but does not continue to spin. I...
What's Wrong With Sealed Tubs?
I noticed you dissing AEG's sealed tubs? on another topic. What are they and why are they bad? Do all AEG's have them? As you know AEG has a pretty good rep regardless.
Loud Banging Indesit Washing Machine
Hi, Bit of a poser for you all. I've got an Indesit WIDL126, 1200 washer dryer. It's been here since we moved in a year ago and works well. Recently it's started making a proper...
Hoover 1300 Will Not Spin Up On Spin Cycle
Hi I have read the Hoover 1100 problems similar to this and disconnected the pressure switch tube, no change. The machine is emptying, it starts to try and spin up, I hear a rel...
Replacing Door Seal
Hi , I need to replace the door seal on my Indesit iwc6165ukc. I've tried doing it without removing the front but i can't get it on. I cant see how to remove the front or even i...
Hotpoint Wt640 Machine Seems To Freeze During Cycles
Hi everyone I have had my hotpoint WT640 for around 5 years and until recently it has been fine. It has a digital counter display and the machine seems to freeze during cycles a...
Bosch Not Heating Water / Filling With Water ?
Hi all, I've just bought a Bosch WAB28061GB - installed today & have done a couple of loads. I'm not sure that its heating the water - the door window feels cold to the touch (w...
Water Leaking From Door
My washing machine is leaking from the door so I assume the gasket is damaged. Any advice how to remove it and fit a new one?
Failing To Stop When It's At The End Of A Drying Cycle
My washer dryer (now around 3yrs old) has recently started failing to stop when it's at the end of a drying cycle. It gets to the final 1 minute according to the display on the...
Bearings Have Gone In The Main Drum
First post so go easy. We have an Indesit IWC7125 bought in France 2 years ago. It has done well, but as its now gone funky, not as well as it should. The bearings have gone in...
Washing Machine Making Clothes Fuzzy
Hi there i purchased a Bosch washing machine (6kg) in March and up until recently its been a great machine, but lately my clothes are coming out of the washer looking fuzzy as i...
New Module Pcb Looks Different
Ok, I have read the general blurb on why the drum won't spin. My machine has had a new motor and a new Module. I also changed the PCB display with a 2nd hand one, and it still w...
Hotpoint Ultima Wt721 Error Code F10 Help?
Hi, Yesterday about halfway through the washing cycle 3 on my Hotpoint Ultima WT721 it stopped and I got error code F-10. I turned it off got all the washing out turned it off a...
No Soap Suds When Washing
Can't see any soapsuds when machine is washing but the tablets have gone from the drawer - washing looks and smells clean but could be the fabric conditioner - have used the sam...