Washing Machine Repair Forum
Front and top loaders that won't spin, drain, fill or finish a cycle - plus error codes, bearings and pumps.
Recent Questions
Level of washing machine
Hoping someone can help. We purchased a new machine and it’s now started knocking (metal to metal sound) when it starts to spin, only briefly then when the spin gets faster it’s...
Whirlpool FSCR 10432
Have checked manual, and googled but not found an answer. Turned washing machine on, selected a wash pressed go, it started then came up with a message saying cancelling. Can't...
Washing machine water level gauge
Hi, i need one that is adjustable for about 40cm water height Input 5V Signal V varies from 0V to 4.5V Does this exist ? Many tnx.
Bosch WFT2800
Hi all I know its an old machine but well made! I am getting Error 3 and the Anti Crease is flashing, so far I have checked the plastic chamber at the bottom of the drum that go...
indersit wd12
Washer Dryer has become very noisy on the rinse/spin typically when hitting high speed. It is very old (about 15 years old) so is probably on its last legs but thought i would c...
Miele washer
Hi any help with this problem before a Miele engineer turns up at great expense miele washer Mod 1914 A error code of Hot water fault shows on the display at the end of every wa...
Miele w524 drain light problem( drain is clear)
Hello, I’m looking for some advice regarding a 10 year old Miele w524 which has a flashing drain light, I have been through all the posts on here and tried all the things mentio...
How to do a pre-wash.
Hi, we've just purchased a bosch wiw28500gb washing machine and my wife has gone to use it for the first time but can't seem to select a pre-wash from the display panel. She has...
zanussi ZWJ14591
Hi my washing machine zwj14591 is not taking conditioner. Normal wash cycle not a problem. I have removed the whole unit NOT JUST TRAY. Washed it soaked it and replaced it. No j...
Grinding sound when the machine is in spin
ECOWMB81445LW Beko. I'm maintenance Engineer but haven't worked on washing machines, thought i would get expert advice before taking the machine apart. When the machine goes in...
Beko wm74135w heating water problems
Hi I'm hoping someone here can help me with my washing machine problems. I think I've put this in the wrong area but DIY repairs was greyed out. Just doing a normal wash and the...
Why does washer take 2 hours to wash?
Hi I have just gotten a new Indesit IWDC6125 was her dryer and the shortest cycle I can find is 2 hours without dryer. i can’t cope with each wash taking two hours. Can anyone r...
Hoover DYND 8164D brough 2011 broken concrete weight
We brought a Hoover Dynamic 8+ wash in April 2011. It has developed a banging noise which I have invested to be the bottom counter weight broken off the drum. Questions are: Is...
tappin/clicking noise
Hi,When my washing machine indesit pwe 91672wuk is spinning there is a tapping/clicking noise but onlt when spinning in one direction .bearings checked ok ,weight checked, tight...
Bosch WCM62 noise on spin
Hi all, We've got a loud noise on spin, like a banging. I'm doubtful it's bearings as it seem to start quite suddenly around a week or so ago, rather than being a 'wear' thing....
Whirlpool AWO/D 049 problem
Hi, Seem to have a problem with my integrated washing machine. I've put it into test mode and this is what happens... The lights all flash across for a few seconds. Then it soun...
Overloaded machine.
Zanussi WDT 1085. Max. load 4.5Kg. I have overloaded machine on a wash, rinse, spin programme and when started it almost immediately trips the RCD. The m/c is now dead with the...
Indesit IWD61450 Problems
Hello, I wonder if someone might be able to help. I have an Indesit IWD61450, not too sure how old it is but probably 4 years or so. This morning I put a wash on, the wash finis...
Heater Element keeps getting caked with fluff and gunge and fusing
Hi 3 months ago we bought a Samsung Ecobubble, which worked fine until last week when it developed a fault where it would run normally for a few minutes then trip the power to a...
Bosch Finishes On 0:01 And Not Fully Drained
I have a Bosch Maxx 7 WAE24362FF/34 - very similar to a UK WAE24369GB - only a few years old. On all cycles, it finishes at 0:01 with a click-a-click-a-click noise (dunno if the...