Washing Machine Repair Forum
Front and top loaders that won't spin, drain, fill or finish a cycle - plus error codes, bearings and pumps.
Recent Questions
Trying to decipher washing machine model numbers
Just trying to decipher Hotpoint Washing washing machine numbers Our washing Machine is a WMUD843P. So, OK I predict the WM=Washing machine, the U=Ultima(which is what it is) bu...
Can you buy a washing machine without a welded drum?
Hi I can't find a machine which does not have a welded drum unit.
Miele W4144 Washing Machine
I have a W4144 which is 11 years old and at the end of the wash cycle on spin the machine begins to 'knock' loudly, get out of balance and fault F50 is displayed, yet on a cycle...
electrolux ewt1067 EF0
Hi, I have an electrolux ewt1067, and in the middle of a cycle it stated to display EF0 where is usually shows the time remaining. It didn't stop the cycle though, and seems to...
Bosch Classixx 6 (2005)
I have a Bosch Classixx 6 1200 spin washing machine. It keeps showing a Fault F16. I looked up this fault and it says keep door closed or linen stuck. I replaced the door lock m...
Bosch Exxcel 1400 (WFO285SGB/01) not going through program
I have a Bosch Exxcel 1400 (WFO285SGB/01) that is currently not functioning. There is power getting to the machine and different times come up when I cycle through the different...
Dyson CR02
Hi, I am new to this forum and was wondering if anyone has any information on our trusty Dyson CR02. I have looked after this machine for quite a few years after Dyson stated th...
part of rigid plastic seal found in washing
I unloaded the washing machine this morning (Bosch ClassiXX 1200 express.....about 10 years old) to find a piece of rigid plastic in the washing and all the washing covered in f...
hec1050s
i left a coin in a pocket now when it does final spin it sounds like it is loose in the drum but after it stops its not in the drum, not in the water filter, not in door insulat...
miele Miele novotronic w 807
I have a Miele novotronic W807 (20 years without problem) yesterday started to make me this: Starts washing, draws water, it starts the main wash which takes too long (almost do...
Washer not heating water
I am connected to a cold water supply and the washing machine doesn't heat the wash up. Can anyone help please?
Whirpool AWZ 412 trips, sparks, then 'dies'
I have a Whirpool AWZ 412 front-loading washer which 3 days ago has tripped the switch board (I wasn't there when this 1st happened). I came from work, found the wet clothing we...
Hoover WDYN 8154D - LCD Display/Circuit board issue?
Hi there I've hunted high and low for any possible solution to this issue, including the FAQ here, but no joy. The washer dryer is working absolutely fine in itself, but when yo...
LG F1280TD6
The handle on my LG washing machine snapped. I ordered and new handle and attempted to replace it myself. i didn't take a photo of how to put it back together and now the spring...
Indesit IWDC6143 Machine Not Turning on
Hi! I've read through the guide pinned at the top and posts from some other people who seem to be having similar problems, but so far no luck. We had a very unnerving experience...
All horizontal lights flashing
Hello Guys This machine is Hotpoint Aquarius WDL540P All horizontal lights are flashing. In attempting to solve it I have checked the pump/filter for blockage, twice. The machin...
HOOVER DYN 8144 D1X No Lights/power
I have a Hoover DYN 8144 D1X washer that has suddenly got no power. Have tried the basic fixes in the troubleshooting guide, the fuse is fine and I have tried a different socket...
Bosch - Bra's getting caught in seal after repair
Hi, i have a Bosch washing machine WAQ283S1GB purchased in December. In Feb we had an issue with the concrete weight that had broken. Bosch repaired it. 2 washes after repair a...
Indesit IWC125
MY Indesit , IWC125 Yesterday My Machine worked Perfectly But today when I Plugged it in to the Mains I filled it up with dirty Clothes as I Plugged it in all the Lights Came on...
Miele wkb120
Hi folks I recently bought a Miele wkb120 and I've noticed when the machine goes into a spin the drawer rattles loudly is there any way to fix this ? I was thinking of putting m...