Home

Washing Machine Repair Forum

Front and top loaders that won't spin, drain, fill or finish a cycle - plus error codes, bearings and pumps.

Got a washing machine fault?

Describe your problem and get free help from UK engineers and experienced DIYers - most questions get a reply within hours.

Recent Questions

Solved
Washing Machines
Hotpoint
EFAsked by Efectaz

Hotpoint NSWR 743U - f01 fault code, no spin, clicking sound

Hey everyone, may someone had experience with that issue Hotpoint NSWM743UW 2.5 years old Flashing f01 fault and doing that clicking noise. It can load programme - pump in water...

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
Hoover
JLAsked by JLivingstonSG

Hoover wdyn 9646pg-30s shut down after 15 sec

Hi. I have a hoover washing machine wdyn 9646pg-30s and I got a error code that said I need to change the door lock. So I did. Now if I power it up it shut down after 15 seconds...

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
Samsung
ANAsked by andyr12345

Creaking noise from Samsung Washing Machine when drum turning

hello Andy have you come across this before. I bought a Samsung ecobubble 8Kg washing machine out of a paper cheap enough and its got a Carbon Brush type wash motor on it. I got...

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
Beko
ADAsked by Alex Davies

Beko PCB keeps burning out - Advice needed

Hi, I have a Beko WI1573 washing machine and I have had three instances where the circuit board which contains the LED fails. The screen suddenly doesnt display anything during...

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
Indesit
SAAsked by Sarah38

Indesit beeping

Hi I have an indesit IWC71252 washing machine. The wash seems to be ok but it beeps a lot throughout the cycle. It’s usually 3 or 4 beeps but I don’t know what’s causing it. I h...

Latest reply over 3 years ago by jcol94

Can't find your fault?

Ask about your washing machine and get a tailored answer from our community.

Solved
Washing Machines
OVAsked by Overhaul

Washing machine doesn't run its cycle.

My front load washing machine fills up with water normally but doesn's spin for a few minutes. After a few minutes, it spins for 30 seconds, then stops again, after a few minute...

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
Indesit
REAsked by Rexer

Indesit drying knob loose

Hi The drying knob on our indesit IWDC6125 washer dryer is loose and not clicking. Now you cant stop the machine drying. I read online that you can easily take out the knob and...

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
KIAsked by Kingpin

Problem adjusting the legs on washing machine

Have moved and have problem adjusting the legs in the new location. I have the Miele tool and have tried to adjust the nuts, but they seem to be very tightly adjusted so I canno...

Latest reply over 3 years ago by Kingpin
Solved
Washing Machines
Hoover
STAsked by steverob10

Hoover Visiontech washing machine fault

Hi - I returned to my washing maching to discover that the cycle hadn't finished and the pump was running. It continued running even when the rotary dial was set to off, so I sw...

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
Zanussi
LAAsked by laura87

Zanussi - problem with drum

I just did a normal wash, nothing different than usual. When the spin got faster it made an almighty banging sound. When it finished, the clothes were soaking wet and there were...

Latest reply over 3 years ago by Whitegoodshelp

Can't find your fault?

Ask about your washing machine and get a tailored answer from our community.

Solved
Washing Machines
Miele
BAAsked by barnesy1977

Miele W5872, wet load after spin, injects water towards end. Possibly faulty non-return brake valve ?

Hello, thanks for reading my post. I have a Miele W5872 edition 111, but have a problem in that the washing comes out soaking. I've noticed during the final spin cycle, at some...

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
SUAsked by Superuser2000

Washing machine water intake very slow to begin with

My AEG L76850 washing machine from 2007-2009 gives me an "E10" error. According to the manufacture the error is about the water intake. When starting a wash, it hums loudly and...

Latest reply over 3 years ago by andyr12345
Solved
Washing Machines
Hotpoint
MRAsked by MrRatty

Hotpoint making hum noise when heating water (video attached)

Hello everyone 😀 My hotpoint washing machine has begun making an odd low humming noise, it can be heard even when the drum is not spinning and only happens towards the start of...

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
BEAsked by Benjaminski

Washing machine only spins on fastest spin setting

My Hotpoint WT540 washing machine only spins on the fastest cycle, even when a slower setting is selected on the dial. Can this be fixed easily?

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
Miele
ASAsked by Asparagus

Miele W5740 time stops and cycle carries on and unusual noise on spin

We got this second hand Miele. Sadly on some cycles the timer stops and cycle carries on until stopped. There’s also a bit of unusual sound on spin, it’s not very loud and doesn...

Latest reply over 3 years ago by Whitegoodshelp

Can't find your fault?

Ask about your washing machine and get a tailored answer from our community.

Solved
Washing Machines
KAAsked by kanton

Heatpump

I'm looking to buy a new dryer washing machine and there are some dryer/washers with heatpump out there. These are quite expensive so I'm curious if it's worth the money?

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
Indesit
THAsked by Tim Hill

Indesit mytime ewd81483wukn

hi I got this machine just over a year ago it's worked great until about a week ago! The last time it was used it finished its cycle no problem. I put a load in the machine and...

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
ANAsked by andyr12345

Dettol Laundry Sanitizer Liquid

What is your knowledge on this Dettol laundry Sanitizer Andy? - and at what stage would you (if you used it) add it to the wash? Dettol claim on the label that it works in low t...

Latest reply over 3 years ago by andyr12345
Solved
Washing Machines
Miele
KAAsked by karlinamillion

Why is Miele W1515 heating water on cold cycle?

I have a Miele Polaris W1515, sometimes it does not fully rinse so I run and 'Express wash', with the temperature set to cold. But, after the first fill it starts to heat the wa...

Latest reply over 3 years ago by Whitegoodshelp
Solved
Washing Machines
GMAsked by Gman4141

Washing Machine stops on long cycles

HI, We have a Indesit Innex Washer Dryer, We dont use the Dryer side (takes too long) Just on the cycles that are more than an hour about 20 mins in to the Cycle the Error code...

Latest reply over 3 years ago by Whitegoodshelp

Top Contributors

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your appliance.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Shop

Fix it yourself for less. Find the right part for your appliance and order it direct.

  • Search by your full model number
  • Genuine and compatible parts
  • Fast 1–3 day dispatch